Log Cam: RAW 4K Video

High-quality log footage with manual controls on iPhone

In their words

Log Cam: RAW 4K Video Camera is an iPhone video camera for anyone interested in filmmaking, beginners and professionals alike. It records high-quality log and RAW footage with manual controls, on a camera screen that is easy to use.

The picture is 3840x2160. You can record it in Apple Log, Apple Log 2, S-Log3, Log-C3, V-Log, F-Log or F-Log2, and an iPhone 12, 13 or 14 can use those profiles. The file can be ProRes 422 HQ, ProRes 422 or ProRes 422 LT, or 10-bit HEVC at 4:4:4 or 4:2:0, and bitrate presets run from 30 to 500 Mbps. Frame rates are 23.976, 24, 25, 29.97 and 30 fps.

If you load a cube LUT, you can watch it on the monitor while the clip stays log, or you can bake it into the clip and the photographs as Rec.709. A histogram, zebras and false color show exposure on the log picture. Focus, ISO and shutter can move during the take. Photo mode is in the same app, and it writes a DNG and a HEIC into Library next to the video.

Log Cam is free for 10 days with no card, and one purchase after that keeps recording open. The app needs iOS 17.6. https://logcamvideo.com

Fact file

Mobile app
Price
Free trial
Free for 10 days with no card, then one-time Pro purchase
Runs on
  • iOS
Built for
hobbyists · beginners
Connects to
  • Gyroflow
  • Files app
  • Photos
  • AirDrop
Resolution
3840x2160
Bitrate
30 to 500 Mbps
Requires
iOS 17.6 or later
Compiled from logcamvideo.com · Nov 2026Spot a mistake? Tell us

What is Log Cam: RAW 4K Video?

Filmmakers shooting on an iPhone get 3840x2160 log video, recorded in one of seven log profiles with manual ISO, shutter and white balance. The app is for hobbyists, beginners and professional cinematographers. Mehmet Ali Kisacik makes Log Cam: RAW 4K Video Camera, and the developer's site states that it has no connection to Log Cam: Open Gate by RAW Cam, an app with a near-identical name. The app is free for 10 days with no card, and one purchase after that keeps recording open.

Seven log profiles and the files they write

The app records Apple Log, Apple Log 2, S-Log3, Log-C3, V-Log, F-Log and F-Log2. Frame rates are 23.976, 24, 25, 29.97 and 30 fps. Each clip can be written as ProRes 422 HQ, ProRes 422, ProRes 422 LT, or as 10-bit HEVC at 4:4:4 or 4:2:0, with bitrate presets from 30 to 500 Mbps. The app applies the log curves in its own GPU pipeline instead of asking iOS for Apple's Log. The site says Apple's own Log needs an iPhone 15 Pro or later, while the app's profiles are not limited to those phones. The app needs iOS 17.6 or later, and the available resolution, frame-rate and bitrate combinations depend on the iPhone model.

Monitoring a LUT or baking it in

Users import their own .cube LUT. In monitor mode the LUT shows on screen while the file keeps the plain log signal, which the page recommends for footage meant for grading. Baking writes the LUT into the clip permanently, so the saved file carries the look without an editing app. A linear histogram, zebras with selectable IRE thresholds and false color show exposure on the log picture. ISO, shutter and focus can be adjusted during a take, and focus can be set by autofocus or by tapping the subject.

Recording to an external drive

Clips can be recorded to the iPhone or directly to an external SSD or hard drive connected to the phone, with no computer needed. The gallery shows clips on the iPhone and on the selected drive. Clips already on the iPhone can be exported to a drive or the Files app, and the original stays until it is deleted. Clips stored inside the app are removed when the app is deleted, so the site advises exporting them first. The app also records from a Bluetooth, wired or USB microphone, and writes a Gyroflow GCSV file for each clip for stabilizing in Gyroflow afterwards.

Similar Products

You may also like